Collinear Ai · , San Francisco, CA · Sunnyvale, California +1
Hybrid · Lead & above
Medium competition (est.)
Filed H-1B · FY25Filed 1 H-1B LCA in FY2025
Posted 1 month ago
Own optical end-of-line test strategy at the supplier — MTF/SFR, distortion, field curvature and tilt, relative illumination, stray light, flare and ghosting, color and luminance shading, defective pixels, particle and cosmetic criteria — including limit-sample governance, chart and light-source control, and correlation between supplier, Skydio, and field measurements.
Drive supplier quality and manufacturing readiness for thermal imaging modules, including thermal sensor, infrared optics, opto-mechanical assembly, calibration, and module-level integration. Assess and control critical thermal-camera processes such as NUC calibration, gain/dynamic-range calibration, bad-pixel correction, thermal stabilization, and blackbody-based performance verification across operating temperature ranges.
Manage supplier corrective action requests (SCARs), 8D investigations, containment actions, and root cause analysis to rapidly resolve quality issues and drive systemic improvements across lines and across suppliers.
Develop and maintain supplier scorecards and KPIs focused on quality, yield, reliability, and responsiveness, driving continuous improvement toward zero defects.
Analyze factory and field quality data to identify trends, assess supplier performance, and proactively mitigate risks across lens fabrication, coating, active alignment, adhesive dispense and cure, sensor attach, and module-level calibration.
Validate that supplier corrective actions for design or process changes are sustainable and correctly propagated to every affected line, tool, and site.
Recommend alternative materials, adhesives, coatings, or process approaches that improve manufacturability, image performance, environmental robustness, or cost.
Collaborate with suppliers to implement inspection, test, and process control methodologies that hold long-term process capability on optically critical dimensions.
What Makes You a Good Fit:
Bachelor’s degree in Optical, Mechanical, Electrical, or Manufacturing Engineering, Physics, or equivalent practical experience.
5+ years in supplier quality, manufacturing, or product engineering for camera modules, lenses, or optical assemblies, including hands-on experience at supplier factories.
You are a self-starter with a passion for delivering exceptional image quality and reliability in advanced electro-optical products.
You possess strong interpersonal, communication, and leadership skills, with the ability to influence cross-functional teams and supplier partners to achieve quality objectives.
You have experience developing, qualifying, and managing camera and optics suppliers across multiple geographies, and you’re comfortable working across time zones and cultures.
You have quality engineering experience in high-volume, high-complexity consumer electronics, automotive, aerospace, robotics, or similar industries, with deep knowledge of camera module and lens manufacturing.
You are familiar with lens and camera module manufacturing processes: injection molding and glass lens fabrication, AR/IR coating deposition, barrel assembly, active alignment (AA), UV and thermal adhesive cure, dispensing, sensor attach and wire bond or flip chip, VCM and actuator assembly, and optical end-of-line test.
Sponsorship data shows employers' past filings in public US government records (DOL, USCIS, E-Verify) and is not a promise that any job will be sponsored. Immigration rules change. Verify your situation with your DSO or an immigration attorney.